ViscoMelt 5 Specification |
| |
|
|
PERFORMANCE |
Outputs |
Dynamic viscosity, IV |
|
Viscosity Range |
1 – 10 8 Pa.S |
| |
Measurement Time |
2 seconds |
TEMPERATURE |
Integral Thermometer |
Integrated tip mounted temperature measurement |
| |
Temperature Range |
0 – 350 °C (32 – 662°F)* |
PRESSURE |
Standard Range |
400bar* |
PROCESS CONNECTION |
Standard Fitting |
M18 × 1.5 thread |
ELECTRICAL CONNECTION |
Cable Length |
As required – not affected by cable length up to 1000m |
| |
Cable Type |
Standard instrument cable |
| |
Power |
Powered by signal processor |
| |
Power consumption |
0.5W |
SAFETY CERTIFICATION |
Hazardous Area |
1G Ex ia IIC T1…T6 Ga |
|
|
1D Ex ia IIIC 200 135°C Da |
CONSTRUCTION |
Solid-state |
No moving parts |
SENSOR MATERIALS |
Fitting |
As required |
| |
Sensor |
Inconel 718, Duplex stainless steel |
SURFACE FINISH |
Standard |
N6 0.8 Ra |
INGRESS PROTECTION |
Standard |
IP67 |
* SPECIAL OPS |
Custom variations to instrument specification and dimensions routinely provided by our dedicated Special Operations division |
| As it is Hydramotion’s policy to continuously develop and improve its products, some specifications may change without notice |
ViscoMelt 7 Specification |
| |
|
|
PERFORMANCE |
Outputs |
Dynamic viscosity, IV |
|
Viscosity Range |
1 – 10 8 Pa.S |
| |
Measurement Time |
2 seconds |
TEMPERATURE |
Integral Thermometer |
Integrated tip mounted temperature measurement |
| |
Temperature Range |
0 – 350 °C (32 – 662°F)* |
PRESSURE |
Standard Range |
To process fitting |
PROCESS CONNECTION |
Standard Fitting |
All melt pipe fittings |
ELECTRICAL CONNECTION |
Cable Length |
As required – not affected by cable length up to 1000m |
| |
Cable Type |
Standard instrument cable |
| |
Power |
Powered by signal processor |
| |
Power consumption |
0.5W |
SAFETY CERTIFICATION |
Hazardous Area |
1G Ex ia IIC T1…T6 Ga |
|
|
1D Ex ia IIIC T200 135°C Da |
CONSTRUCTION |
Solid-state |
No moving parts |
SENSOR MATERIALS |
Fitting |
As required |
| |
Sensor |
Inconel 718, Duplex stainless steel |
SURFACE FINISH |
Standard |
N6 0.8 Ra |
INGRESS PROTECTION |
Standard |
IP67 |
* SPECIAL OPS |
Custom variations to instrument specification and dimensions routinely provided by our dedicated Special Operations division |
| As it is Hydramotion’s policy to continuously develop and improve its products, some specifications may change without notice |
ViscoMelt 9 Specification |
| |
|
|
PERFORMANCE |
Outputs |
Dynamic viscosity, IV |
|
Viscosity Range |
1 – 10 8 Pa.S |
| |
Measurement Time |
2 seconds |
TEMPERATURE |
Integral Thermometer |
Integrated tip mounted temperature measurement |
| |
Temperature Range |
0 – 350 °C (32 – 662°F)* |
PRESSURE |
Standard Range |
To process fitting |
PROCESS CONNECTION |
Standard Fitting |
All melt pipe fittings |
ELECTRICAL CONNECTION |
Cable Length |
As required – not affected by cable length up to 1000m |
| |
Cable Type |
Standard instrument cable |
| |
Power |
Powered by signal processor |
| |
Power consumption |
0.5W |
SAFETY CERTIFICATION |
Hazardous Area |
1G Ex ia IIC T1…T6 Ga |
|
|
1D Ex ia IIIC T200 135°C Da |
CONSTRUCTION |
Solid-state |
No moving parts |
SENSOR MATERIALS |
Fitting |
As required |
| |
Sensor |
Inconel 718, Duplex stainless steel |
SURFACE FINISH |
Standard |
N6 0.8 Ra |
INGRESS PROTECTION |
Standard |
IP67 |
* SPECIAL OPS |
Custom variations to instrument specification and dimensions routinely provided by our dedicated Special Operations division |
| As it is Hydramotion’s policy to continuously develop and improve its products, some specifications may change without notice |