XL7
Specification
sales@hydramotion.com
XL7 – d16 SPECIFICATION |
||
PERFORMANCE |
Range | 0 – 10 8 Pa.S |
| Measurement Time | 1 second | |
| Accuracy | 1% of reading or +/- 1 digit | |
| Repeatability | 0.3% of reading or +/- 1 digit | |
TEMPERATURE |
Integral Thermometer | Integrated tip mounted temperature measurement |
| Range | 400 °C | |
PRESSURE |
Standard Range | To process fitting |
PROCESS CONNECTION |
Standard fitting | All melt pipe fittings |
| Special fitting | Retrofits for all other viscometer replacements | |
ELECTRICAL CONNECTION |
Cable Length | As required – not affected by cable length up to 1000m |
| Cable Type | Any standard instrument cable | |
| Power | VP Processor powered | |
SAFETY CERTIFICATION |
Hazardous Area | All instruments available for Ex Hazardous Area, explosive atmospheres |
| Ga Ex ia IIC T1…T6 | ||
CONSTRUCTION |
All welded, crevice-free | No trap areas or dead-zones for polymer melt |
MATERIALS |
Head | SS316 ( EN 1.4401) |
| Fitting | As Required | |
| Sensor | SS316 ( EN 1.4401) and SS316L ( EN 1.4404) as standard | |
| Sensor/Fitting Options | Alloy C22 (EN 2.4602) | |
| Alloy C276 (EN 2.4819) | ||
| S32750 Duplex Steel (EN 1.4410) | ||
| Alloy 718 | ||
| Special Materials: | Non-standard materials to order * | |
SURFACE FINISH |
Standard | N6 0.8 Ra |
| Special Finish | Non-standard finish options and coatings to order * | |
INGRESS PROTECTION |
Standard | IP67 |
SOFTWARE |
ViscoLink data viewing and logging PC software | |
* SPECIAL OPS |
Custom variations to instrument specification and dimensions routinely provided by our dedicated Special Operations division | |
| As it is Hydramotion’s policy to continuously develop and improve its products, some specifications may change without notice | ||