XL7
Specification
sales@hydramotion.com
XL7 SPECIFICATION |
||
PERFORMANCE |
Range | From 0 – 1cP to 0 – 10 9 cP over 10 models |
| Measurement Time | 1 second | |
| Accuracy | 1% of reading or +/- 1 digit | |
| Repeatability | 0.3% of reading or +/- 1 digit | |
TEMPERATURE |
Standard Range | -50 °C to 150 °C |
| HT Range | -50 °C to 400 °C | |
| Extended Range | Temperature greater than 150 / 400 °C to order* | |
PRESSURE |
Standard Range | To process fitting |
| Extended Range | To order for extreme pressure * | |
PROCESS CONNECTION |
Standard fitting | Any process fitting – all flanges, threads, clamps, hygienic |
| Special fitting | Non-standard process connection to order * | |
ELECTRICAL CONNECTION |
Cable Length | As required – not affected by cable length up to 1000m |
| Cable Type | Any standard instrument cable | |
| Power | VP Processor powered | |
SAFETY CERTIFICATION |
Hazardous Area | All instruments available for Ex Hazardous Area, explosive atmospheres |
| Ga Ex ia IIC T1…T6 | ||
CONSTRUCTION |
All welded, crevice-free | |
MATERIALS |
Head | SS316 ( EN 1.4401) |
| Fitting | As Required | |
| Sensor | SS316 ( EN 1.4401) and SS316L ( EN 1.4404) as standard | |
| Sensor/Fitting Options | Alloy C22 (EN 2.4602) | |
| Alloy C276 (EN 2.4819) | ||
| S32750 Duplex Steel (EN 1.4410) | ||
| Special Materials: | Non-standard materials to order * | |
SURFACE FINISH |
Standard | N6 0.8 Ra |
| Finish Options | Fluoropolymer | |
| Electropolished | ||
| Electroplated | ||
| Special Finish | Non-standard finish options and coatings to order * | |
INGRESS PROTECTION |
Standard | IP67 |
SOFTWARE |
ViscoLink data viewing and logging PC software | |
* SPECIAL OPS |
Custom variations to instrument specification and dimensions routinely provided by our dedicated Special Operations division | |
| As it is Hydramotion’s policy to continuously develop and improve its products, some specifications may change without notice | ||